M7 DW1840, Руководство пользователя

Страница: 5 / 42

5
5
when changing accessories. Following this rule will
UHGXFHWKHULVNRIHOHFWULFVKRFN¿UHRUVHULRXV
SHUVRQDOLQMXU\
7) Do not place battery tools or their batteries
QHDU¿UHRUKHDW7KLVZLOOUHGXFHWKHULVNRI
H[SORVLRQDQGSRVVLEOHLQMXU\
8) Do not crush, drop or damage the battery
pack. Do not use a battery pack or charger that
has been dropped or received a sharp blow.
$GDPDJHGEDWWHU\LVVXEMHFWWRH[SORVLRQ
Properly dispose of a dropped or damaged
battery immediately.
9)
$GDPDJHGEDWWHU\LVVXEMHFWWRH[SORVLRQ
Properly dispose of a dropped or damaged
battery immediately.
10) Batteries vent hydrogen gas and can explode
in the presence of a source of ignition, such
as a pilot light. To reduce the risk of serious
SHUVRQDOLQMXU\QHYHUXVHDQ\FRUGOHVV
SURGXFWLQWKHSUHVHQFHRIRSHQÀDPH$Q
exploded battery can propel debris and
chemicals. If exposed to such debris or
FKHPLFDOVLPPHGLDWHO\ÀXVKWKHH[SRVHG
area with water.
11) Do not charge a battery tool in a damp or wet
location. Following this rule will reduce the risk
of electric shock.
12) Under extreme usage or temperature
conditions, battery leakage may occur.
13) ,IFRQWDFWDFFLGHQWDOO\RFFXUVÀXVKZLWKZDWHU
If liquid contacts eyes, seek medical help.
/LTXLGHMHFWHGIURPWKHEDWWHU\PD\FDXVH
irritation or burns.
14) If liquid comes in contact with your skin,
wash immediately with soap and water, then
QHXWUDOL]HZLWKOHPRQMXLFHRUYLQHJDU
15) If liquid from the battery gets in your eyes,
ÀXVKWKHPZLWKFOHDQZDWHUIRUDWOHDVW
minutes, and then seek immediate medical
attention. Following this rule will reduce the
ULVNRIVHULRXVSHUVRQDOLQMXU\
6.SERVICE
1) +DYH\RXUSRZHUWRROVHUYLFHGE\DTXDOL¿HG
repair person.
2) When servicing a power tool, use only identical
replacement parts.
3) Follow instructions in the Maintenance section of
this manual. Use of unauthorized parts or failure
to follow Maintenance instructions may create a
ULVNRIVKRFNRULQMXU\
ADDITIONAL SAFETY RULES
FOR IMPACT WRENCH
1) Hold power tools by insulated gripping
surfaces when performing an operation where
the cutting tool may contact hidden wiring or
its own cord. Contact with a “live” wire will
make exposed metal parts of the tool “live”
and shock the operator.
2) Use clamps or other practical way to support
and secure the workpiece to a stable platform.
Holding the work by hand or against your body
is unstable and may lead to loss of control.
3) Do not drill, fasten or break into existing walls
or other blind areas where electrical wiring
may exist. If this situation is unavoidable,
disconnect all fuses or circuit breakers
supplying the worksite.
4) Always wear safety goggles or eye protection
when using this tool.
5) Bits, sockets, and tools get hot during
operation. Wear gloves when touching them.
6) Wear ear protectors when using the tool for
extended periods. Prolonged exposure to high
intensity noise can cause hearing loss.
7) Use thick, cushioned gloves and limit the
exposure time by taking frequent rest periods.
Vibration caused by hammer-drill or Imapct
wrench action may be harmful to your hands
and arms.
8) Secure the material being fastened. Never
hold it in your hand or across your legs.
Unstable support can cause loss of control
DQGLQMXU\
9) Avoid accidental starting. Be sure the forward/
reverse switch is in the OFF position before
inserting a battery pack. Carrying appliances
ZLWK\RXU¿QJHURQWKHVZLWFKRULQVHUWLQJWKH
battery pack into an appliance with the switch
on invites accidents.
10) Remove battery pack before changing
accessories. Accidental starting may occur
because battery appliances with a battery
inserted are in the operative condition.
11) Be prepared for a reaction torque when
“seating” or removing a fastener. The tool
housing may tend to twist in the opposite
direction of bit rotation when “seating” or
removing a fastener, depending on the torque
setting of the tool.