Charging
z
Connect plug in from charger to charge jack of main
z
Charging in Cradle
z
Connect plug-in from charger to charge jack of main
body, or charge jack of cradle, and then place main
body onto cradle.
z
Charging LED
z
Charging in Cradle
Separate Battery
duction
Type
LED Status
Details
Direct charging to main
body
Red
Green
Charging
Charging Complete
Cradle Charging
Red
Charging
Separate Battery
In
tr
od
z
When charging, the status of the battery attached to
main body can be confirmed by the LED left of upper
corner of main body Also the status of Sub-battery
(Extra battery charging)
Green
Charging Complete
p
y
Charging LED
corner of main body. Also the status of Sub battery
can be confirmed by the LED right of low corner of
Cradle.
Do not use any other charger except one (5.2 V / 5A) provided .
Make sure to handle it gentle; damage with excessive force may cause no warranty.
17
Risk of explosion if battery is replaced by an incorrect type.
Dispose of used batteries according to the instructions.
When attached battery is completely discharged, plug charger to main body, then reset the
device to check if screen is back on. To use, do at least 10 minute charging.
Содержание MM3
Страница 19: ...2 Basic Usage 2 Basic Usage Main screen Input Screen 19...
Страница 26: ...3 ActiveSync 3 ActiveSync ActiveSync Introduction Installing ActiveSync Synchronization of Data...
Страница 30: ...4 How to use Internet 4 How to use Internet Via Wireless HSDPA Via Wireless WLAN Browsing the Web Site...