EVO PHONODAC TWO
DXD-DSD A-TO-D AND D-TO-A CONVERTER – PHONO PREAMP
REVISION P
R
A – JULY 2016
Copyright © 2016, M2Tech Srl
24
M2Tech
www.m2tech.biz
•
MUTED: at power on, the
EVO PHONODAC TWO
S/PDIF sets the output volume to
zero (complete mute).
8.4. Output signal phase (PHASE)
This item also relates to 3 values:
•
BACK: go to level 1;
•
INVERTED: the output signal’s polarity will be inverted;
•
NORMAL: the output signal’s polarity will NOT be inverted.
8.5. Channels swap (CH SWAP)
This item also relates to 3 values:
•
BACK: go to level 1;
•
YES: left and right channel signals will be swapped at output connectors (left
channel sent to right connector and right channel sent to left connector);
•
NO: left and right channel signals will be sent to their related output connectors.
8.6. Low-pass filter (LP FILTER)
This item relates to 4 values:
•
BACK: go to level 1;
•
5KHZ: frequencies above 5kHz will be cut off;
•
10KHZ: frequencies above 10kHz will be cut off;
•
OFF: signal is passed without high frequency cut.
8.7. High-pass filter (HP FILTER)
This item relates to 6 values:
•
BACK: go to level 1;
•
120HZ: frequencies below 120Hz will be cut off;
•
60HZ: frequencies above 60Hz will be cut off;
•
15HZ: frequencies above 15Hz will be cut off (IEC compliancy);
•
1HZ: frequencies above 1Hz will be cut off;
•
OFF: signal is passed without low frequency cut.
8.8. MPX filter (MPX FLT)
