M2MLogger LogPRO TOUCH, Руководство пользователя

Страница: 8 / 18

8
UM200002 ISSUE A REV 00
User Manual
7 LogPRO TOUCH
LogPRO TOUCH series comprises of advanced data-logging devices for real-time metrological monitoring. They enhance your
capability monitor, analyze and control the performance of your process remotely, from any place in world. These gateway
devices can be easily interfaced with:
•
Existing PLC, DCS or SCADA system with a MODBUS interface.
•
4-20mA output sensors.
7.1 Features
•
Real-time data collection.
•
IoT Cloud gateway.
•
5” Resistive Touch display with
integrated keypad.
•
MODBUS RTU RS-485 &
MODBUS Ethernet/IP.
•
File Transfer Protocol (FTP).
•
USB Pen drive data logger.
•
Signal Scaling.
•
Rugged design for rough
Industrial conditions.
•
Compact DIN rail mounting.
•
Plug-n-play.
•
Fail-safe for power failures.
•
Over-The-Air (OTA) upgrades.
LogPRO supports MODBUS RS-485 through screw terminals, USB pen drive through USB type A connector, 10/100 Mbps
Ethernet through a standard Ethernet connector (RJ-45) and GSM/GPRS.
It can be configured via a user-friendly Web interface (WebUI).
7.2 Technical Specification
Parameters Description
Ethernet 10/100 Mbits
USB Host 1 (USB 2.0)
Real Time Clock Yes, with internal Battery backup
Stability 1ppm/yr
Clock Accuracy +/-5 Seconds per week
SNTP Yes
FTP Yes (Plain FTP)
RS485 2
RS232 1
Analog Inputs 16 Analog Inputs
(4-20mA)
Switched Power
Outputs 4
Logging Interval User programmable from 1 min to
24 hours
Storage MicroSD 256MB or better
Display &
Keypad 5” TFT Display with Touch Keypad
Power +9VDC to 24VDC @ 2.5A (max)
Nominal: 12VDC
Protection Transient Voltage Suppressor,
600W, t=10us
Environmental
Operating
Temperature -40 to 75 °C
Humidity 0 to 95% RH non-condensing
Physical
Dimensions 182.2 x 125.4 x 80.29 mm
Weight 540gms