MQ03-LTE-M-FIRE Installation and Operation Manual
Proprietary Content, v.1.1 08/2020
4
Safety Instructions
This unit must be checked by a qualified technician once a year.
The MQ03-LTE-M-FIRE device contains a radio transceiver operating in LTE CAT-M1 band.
Do not use the Device with medical devices, or where it can interfere with other devices and cause any potential
danger.
Do not expose the Device to high humidity, chemical environment or mechanical impacts.
Do not use the Device in hazardous environment. Don’t store or install the Device in overheated, dusty, wet or
overcooled places.
The Device is mounted in limited access areas. Any system repairs must be done only by qualified, safety aware
personnel. Don’t disassemble or refit the Device. Do not attempt to personally repair it.
Mains power must be disconnected before any installation or tuning work starts. The device installation or
maintenance must not be done during stormy conditions.
The device must be powered by DC 12-29V, 200mA power supply.
Blown fuses or any other components of the Device must not be replaced by the user.
Keep the Device dry. Any liquid, i.e. rain, moisture, may destroy or damage the inside circuitry.
Handle carefully. Don’t vibrate or shake it violently.
Don’t clean it with chemicals, detergent.
Please read the user manual carefully before installation and operation of the Device. Otherwise, it may not work
properly or be destroyed.
Technical Support
For support in the USA and Canada, contact M2M Services Technical Support at:
•
Telephone: 1-800-403-7029
•
•
Website:
