background image

RTCU LX4 pro Technical Manual V1.00 

Advanced Industrial M2M/IoT Gateway 

 

Logic IO ApS. 

 

Ph:   (+45) 7625 0210 

Holmboes Allé 14 

 

Fax: (+45) 7625 0211 

8700 Horsens                               

Page 4 of 39 

Email[email protected] 

Denmark                                       

 

www.logicio.com 

 

Important Information

 

 

Thank you very much for using a product from Logic IO Aps. Our products are designed for 
professional use, and therefore this manual assumes technical knowledge and practice working with 
such products. 
 
This documentation does not entail any guarantee on the part of Logic IO Aps with respect to 
technical processes described in the manual or any product characteristics set out in the manual. We 
do not accept any liability for any printing errors or other inaccuracies in the manual, unless it can be 
proven, that we are aware of such errors or inaccuracies, or that we are unaware of these as a result of 
gross negligence and Logic IO Aps has failed to eliminate these errors or inaccuracies for this reason. 
 
This product is a complex and sensitive electronic product. Please act carefully and ensure 
that only qualified personnel will handle and use the device. In the event of damage to the device 
caused by failure to observe the information in this manual and on the device, Logic IO Aps shall not 
be required to honor a warranty claim even during the warranty period and shall be exempted from 
the statutory accident liability obligation. Any attempts to repair or modify the product also voids all 
warranty claims. Do not open the product. There is no user-serviceable part inside.  
 
Please contact Logic IO for any technical or commercial inquiries: 
 

Logic IO Aps. 
Holmboes Alle 14 
8700 Horsens 
Denmark 
Phone: 

+45 76250210

 

Support: 

[email protected]

 

URL: 

www.logicio.com

 

 
 

 

Содержание LOGIC io








































Отзывы: