m2m Germany GmbH | Am Kappengraben 18-20 | 61273 Wehrheim | 06081 5873860
Once provisioned on a LoRaWAN® network, the device sends the distance & timestamp to the server via uplink.
3.1 Level settings
Level measurements are carried out according to few parameter settings. A target over the defined range cannot be detected. Read and write of parameters
can be done using LoRaTool App. They have a default value and can be modified to be tailored on the specific use case.
Meaning of parameters is related to following diagram. The
“REFERENCE”
(distance=0mm) is the top surface of the sensor:
