M2 MT-3000A, Руководство по установке

Страница: 9 / 14

9
GEAR BOX MOTOR DETAIL
The New MT-3000AEL has been outfitted with a high performance high efficiency gear box
using all roller bearings and gear oil. The gear box has been assembled with a light coat of lubricat-
ing oil. No load testing can be performed during ground set up and test before gear box is filled with
oil. Gear oil should be installed before final installation. SAE 80/90 WT oil has been provided. In nor-
mal operation the motor shaft is only subject to oil splash, a splash seal has been installed for nor-
mal operation.
Some oil seepage can occur if the motor is stored incorrectly. See drawing below
for storage position. Be sure to drain oil before storage or shipping.
Filling instructions
Remove oil fill level screw with washer and oil fill plug. Use SAE 80/90 WT oil & fill gear box to oil
level line using the open oil fill level screw hole as a visual guide. Immediately re-insert oil fill level
washer & screw & oil fill plug. Wipe any excess oil.