background image

 

M2 Antenna Systems, Inc. 4402 N. Selland Ave. Fresno, CA 93722 

Tel: (559) 432-8873 Fax: (559) 432-3059 Web: www.m2inc.com 

©2015 M2 Antenna Systems Incorporated 

06/10/15 

Rev.00 

Model  ......................................... DCN100-500 
Frequency Range ....................... 100 To 500 mHz 

*

Gain .......................................... 2 dBi Nominal 

Beamwidth   ............................... 360 Omnidirectional 
Polarity ....................................... Vertical 
Feed type ................................... Direct feed 
Maximum VSWR ........................ 2.2:1 Max 

Input Connector .......................... “N” Female 
Power Handling .......................... 1 kW 
Height / Dia ................................. 51” / 45” 
Mast Size .................................... 1.5” to 2” 
Wind area / Survival ................... 0.5 Sq. Ft. / 120 MPH 
Weight / Ship Wt. ........................ 13 Lbs. / 20 Lbs. 
 

M2 Antenna Systems, Inc. 

Model No: DCN100-500 

FEATURES: 

 
     The M

100-500 MHz Discone antenna is no toy and is ideal for use where broadband omnidirectivity is required. This 

is a heavy commercial grade antenna designed for many years of trouble free operation.  Machined components, 6061-
T6 aluminum materials and an “O” ringed connector means this unit is as weather proof as we can make it.  All hardware 
is stainless steel.  

 

 

SPECIFICATIONS: 

*Subtract 2.14 from dBi for dBd 

Содержание DCN100-500








Отзывы: