48.5-4 ASSEMBLY MANUAL
10. Mount the BOOM TO MAST PLATE as shown on the DIMENSION SHEET and secure with two 2” U-bolts,
cradles, stainless lockwashers and nuts. Two 2” U-Bolts and hardware are supplied for attaching the antenna
to the mast.
11. this completes the ASSEMBLY. When the antenna is installed in position on the mast, the main feedline
can be attached and sealed at that time. REMEMBER to support the feedline at the antenna boom and on the
mast or tower.
Carefully Manufactured By
M2 Antenna Systems, Inc.
4402 N. Selland Ave.
Fresno, CA 93722
(559) 432-8873 Fax (559) 432-3059
www.m2inc.com email: [email protected]
