M1 MIPI-CSI, Быстрый старт, Страница: 4 / 7

Last update: 2022/05/09 15:42 accessory:camera:ov5647 https://wiki.odroid.com/accessory/camera/ov5647?rev=1652078541
https://wiki.odroid.com/ Printed on 2023/06/12 22:03
First, remove the IR-Cut filter to hardware work. you can unscrew two screws from behind of the
OV5647 module.
then please remove the photoresistor and weld a 0ohm resistor. please check the above picture.
After works, please re attach the IR-Cut Filter. it is all of hardware work.
You should add a ov5647_irfilter overlay value to the overlay option on the config.ini file.
you can manually control via sysfs node.
target
$ cd / sys / kernel / debug / regulator / ov5647_irfilter
$ echo 1 > . / enable
or
$
echo
0
> . / enable
Package Included
You have to assemble it by yourself with the following items.
A. 1 x Switchable IR-cut Camera with 15Cm FFC
B. 2 x IR Lights
C. 2 x IR Lights heat sink
D|E. 1 set x Screws and Nuts for assembling IR Lights