BICYCLE ASSEMBLY/REPAIR WORKSTAND
INSTRUCTION MANUAL
1. Open the quick release at the main pillar, pull the legs outwards and then close the quick release
again.
2. Open the quick release in the middle of the workstand and extend the workstand to the desired
height. Then close the quick release thoroughly again.
3. Open the quick release at the top of the workstand and extend the arm to the desired length.
Then close the quick release thoroughly again.
4. For fi xing the tool tray
, open the clamp, lead it around the main pillar and close it again.
By tightening the screw, you fi x the tool tray.
Warning: Unless all quick release mechanisms and handle levers are tightened or closed thoroughly,
this can cause damage of property or injuries of people.
Keep for future reference!
B
C
D
A
B
C
D
A
360°
www.m-wave-bike.com
GB
