2. Put the positioned screen into the special silicone pad for pressing the
screen, put the glass panel down, then put it into the fitting cabin of the
machine, and close the fitting door.
*The placement of the screen is very important, which directly affects the final yield.
The edge of the display window of the screen should be aligned with the edge of the
sponge pad, so as to completely avoid the cable. Pressure leads to waste screen. (If
you have other questions that you don
’
t understand, you can contact the after-
sales technicians to answer for you.)
3. Select "f defoaming", press start to start the automatic screen
pressing.
4. After starting, note that the negative pressure value on the display screen
continues to rise, which means normal. If the pressure value does not rise
after starting, please contact after-sales technicians to solve it for you.