⑸
Usually, the air in the cabin can be sucked out within 30 seconds of vacuum
time, and then the airbag rises slowly, and the bonding time is 45 seconds.
⑹
After the screen is pasted, a screen measurement is required
3. Take out the final product and check whether the display and touch are
normal.
*Before opening the hatch every time, check whether there is gas in the
cavity. The checking method is to observe the vacuum value on the screen,
and the door can only be opened when the air pressure is zero.
3.Working mode
1.Built-in laminating mode
Press the start button, the device can start to work, the machine starts to vacuum,
runs to the set lamination time, the vacuum value jumps, at this time the equipment
starts lamination, when the set lamination time is reached, the equipment starts to
deflate, and the vacuum value returns to zero , the fit is complete.
1. Outside laminating mode
