M-Triangel MG oneS, Руководство по эксплуатации, Страница: 5 / 26

wavelength of 1064 nm, which avoids direct exposure of the eyes or skin to the laser
radiation.
Do not attempt to open the device. Any maintenance and service can only be done
by a technician authorized by the company.
2.3 Laser hazards
The laser output from the laser is invisible infrared light, which can cause tertiary
burns even in the case of deviation from the focal length.
The beam output by the device contains visible and invisible radiation. Harmful to
the human eye. It is forbidden to look directly at the laser beam. To prevent
accidental exposure of the human eye to the output beam or its reflected beam, all
personnel around the device must use special safety glasses. Even if you wear
protective glasses, it is forbidden to look directly at the laser beam.
2.4 Safety goggles
All personnel around the laser system must use special safety glasses and must
ensure that the safety glasses provide sufficient protection for the radiant energy of
the 1064 nm laser.
2.5 Explosion and fire
Fiber laser marking machines are not suitable for use in flammable or explosive
applications. Also do not use in the presence of volatile solvents such as alcohol,
gasoline, etc.
2.6 Electrical safety
The fiber laser marking machine should not be disassembled at will, and there is high
pressure inside, which is easy to cause damage to the human body. In the event of a
malfunction, only a professional technician can open the machine.
2.7 Workplace Marking and Labeling
In the conspicuous position of the installation of the fiber laser marking machine,
you should watch up for the words "Beware of Laser".
Chapter 3 Equipment Technical Parameters and Applicable Environment
3.1 Equipment technical parameters
1:
The fiber laser marking machine adopts fully enclosed, maintenance-free,
high-performance galvanometer scanning system and focusing system, fan cooling
mode, and red light indicating positioning function.
Power demand: 220V/50Hz/2.5A