5
will automatically go to lowest light mode to save battery capacity.
•
Battery indicator LED-light in different colors inside the silcone control button
PREPARATIONS BEFORE USE
Plug the charger into a wall power outlet (100-240V AC).
The charger indicator-LED light then turns green.
Please note and beware.
Charger in the wall outlet first
.
When you have green light on charger then
connect charger to battery. The charger indicator
LED-light now
turns red,
to show that battery is being charged.
After approximately 4-5 hours, the charger
‘indicator-LED-light will again
turn
green
indicating the battery is fully charged.
Unplug both charger and battery when ready
–
do not leave connected to the
wall outlet.
Note - The battery should be fully charged before first use
Note
– Do not leave battery that is being charged unattended for long time
or over night.
OPERATING THE LIGHT
The light house can be mounted
– with the thumb screw - onto the included head
strap, handlebar mount or bike helmet mount. See the illustrations below:
