M.T.H. Tinplate IVES 3243R, Руководство по эксплуатации

Страница: 8 / 24

8
Tinplate Traditions 3243R Electric Engine
Tips on Using PSA
You can terminate PSA at anytime by turning off power to the
track for 15 seconds.
You do not have to be in Forward to use PSA. At the conclusion
of the full sequence, the train will pull away from the station in
whatever direction you were going when you activated the feature.
You can use PSAs even if you are double-heading with another
engine. If the second engine is not equipped with PSAs at all, you
must remember not to leave the throttle at a high voltage level
once you have stopped the engine to run the PSAs. Otherwise, the
engine without PSAs will begin vibrating on the track as its
motors strain to move the train, since they cannot be automatically
disabled during the PSA cycle. If the second engine is an original
Proto-Sound engine equipped with PSAs, you may choose to
disable it when used in double-heading operations, so you will not
experience competing PSA sounds. To disable PSAs in an
original Proto-Sound engine, see the operating instructions for that
engine.
PSA can be triggered from Neutral. It will operate the same as if
triggered while in motion except that, at the conclusion of the
PSA, the engine will depart in the next direction of travel, as
opposed to the direction it was traveling before entering neutral.