If you experience poor or no smoke output when the smoke unit is on and has
fluid, check the wick to see if it has become hard, blackened, and unabsorbent
around the heating element. To remove the smoke unit you will first have to
remove the boiler shell (by removing the body mounting screws shown on Page 18).
Once the boiler has been removed, remove the inspection cover (shown below).
Inspect the wick; if it is darkly discolored and hard, it should be replaced.
Replacement parts and wick replacement instructions are available directly from the
M.T.H. Parts Department, (Order online: www.mth-railking.com, e-mail:
[email protected],Fax: 410-423-0009, Phone: 410-381-2500, Mail: 7020
Columbia Gateway Drive, Columbia MD 21046-1532, ).
Location of inspection cover screws
Premier Chapelon 2-3-1E Pacific Steam Locomotive
24
ProtoSmoke
™
Fluid
ProtoSmoke is the recommended fluid for M.T.H.
products and can be used in other manufacturers
products as well. Choose from 12 different scents:
Christmas, Coal, Diesel, Wood Burning, Coffee, Eggs &
Bacon, Vanilla, Candy Cane, Barbeque, Pipe Smoke,
Cinnamon Roll, and Apple Pie
Remove Screws to access smoke unit
Accessing the Smoke Unit
Inspection Cover Screws
