No. 9 Trolley
3
Set Up Checklist
•
Lubricate the locomotive
•
Check to see whether the battery needs to be charged for full sound effects
•
Apply power to run as described in the Basic Operating
Section of this manual
Lubrication
You should lubricate the engine to prevent it from squeaking.
Use light household oil and follow the lubrication points marked
“L” in Fig. 1. Do not over-oil and avoid getting lubricant on flat
surface of pickup roller. Use only a drop or two on each pivot point.
DO NOT
OVER OIL
DO NOT
OVER OIL
Checking The Battery
You may find, if your locomotive was built several months before you set it up, that the
rechargeable battery has run down and needs to be charged before operating. If you
notice that the sounds are garbled, test and charge the engine as described in the
"Self-Charging Battery Back-Up" on page 15.
Lubricate Pick Up Rollers
Lubricate Pick Up Rollers
Lubricate Wheel Axels
(On Each Truck)
Figure 1. Lubrication Points on the Trolley
