M . T . H . E L E C T R I C T R A I N S
8
F-3 A B A DIESEL ENGINE SET
To override the settings you currently have assigned to the engine and reset it to its
factory defaults, while in neutral press the Horn/Whistle button once, followed immedi-
ately by five quick pushes of the Bell button. Two horn blasts will indicate that the
engine has made the change
RESET TO FACTORY DEFAULTS
Certain Proto-Sound 2.0 sound effects automatically play in programmed conventional
mode conditions:
Squealing Brakes:
This sound plays anytime the engine s speed decreases rapidly.
Cab Chatter:
This sound play when the engine idles in neutral.
Engine Start-up and Shut-down:
This sound plays when the engine is initially
powered on or is powered off for five seconds or more.
AUTOMATIC SOUNDS
MAINTENANCE
This engine should be oiled and greased in order to run properly.
You should regularly lubricate the engine to prevent them from squeaking. Use light
household oil and follow the lubrication points marked L in Figure 2. Do not over oil.
Use only a drop or two on each pivot.
LUBRICATION AND GREASING
Figure 2 - Lubrication Points on the Engine
Pick up Rollers
(L)
Wheel Axles (L)
button. Two Horn/Whistle blasts will indicate that the engine has
made the change. The engine will not change direction (including
going into neutral) until you repeat the 1 Horn/Whistle, 3 bells
code to return the engine to its normal state, even if the engine has been kept without
power for extended periods of time.
