background image

 

DiskOnChip PCI EVB User Manual 

8 Troubleshooting 

Item Action 

Make sure DiskOnChip is formatted. 
Another device may be using the same memory window. 
Remove unnecessary cards and check your BIOS configuration. 
Another device may be using the same memory window. 
Change the base memory address of the DiskOnChip using J1. 
Are you working with the EVB in Dell, Gateway, or Compaq 
machines? The BIOS in all of these machines reserves all 
legacy ISA resource for use by PCI cards. Please use a different 
machine. 
Many BIOSs try to reserve the legacy ISA resource for use by 
PCI cards. Changing the BIOS settings can modify this 
behavior. Look for a setting that describes “Shared ISA Memory 
Space” and ensure that this option is set to enable the 
DiskOnChip window in the base address set with JP1. 
The DiskOnChip firmware may need to be trimmed to work with 
your BIOS. Please refer to the DiskOnChip software tools 
manual and read about the various firmware flags in DFORMAT. 
Ensure that pin 1 of DiskOnChip is aligned with Pin 1 pad on the 
board. Reverse insertion will render the DiskOnChip unusable. 
Are you working with an 8-bit device in 16-bit mode bus? Check 
the J3 and J5 settings. 
Is the driver loaded? When using OSs other then DOS, follow 
the DiskOnChip installation instructions for your specific OS. 
When working with the EVB in non-PC architectures, you must 
use the DiskOnChip Boot SDK (also known as BDK) to enable 
your boot code to identify DiskOnChip and load its driver. 

The EVB is not recognized. 

Your system may have a reset signal that is shorter than the 
standard reset signal defined in the PCI design specifications. 
The DiskOnChip PCI EVB is not recognized by these systems. 
Make sure you have placed the OS system files on DiskOnChip 
(In DOS – Format D: /s). 

I can't boot from the EVB. 

When working with the EVB in non-PC architectures, you must 
use the DiskOnChip Boot SDK (also known as BDK) to enable 
your boot code to load your OS directly from DiskOnChip. 

91-SR-010-04-7L Rev 1.1 

10 

Downloaded from 

Elcodis.com

 

electronic components distributor

 

Содержание DiskOnChip













Отзывы: