R80UST4
5-2-55, Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPAN
Phone: +81(6)6659-8201 Fax: +81(6)6659-8510 E-mail: [email protected]
EM-7028 P. 6 / 9
PC CONFIGURATOR
The following parameters can be set with using PC Configurator Software (model: R80CFG)
Refer to the users manual for the R80CFG for detailed operation of the software program.
■
CHANNEL INDIVIDUAL SETTING
ITEM
SETTING RANGE
DEFAULT VALUE
Unused setting
CH enabled
CH disabled
CH enabled
Input type
DC voltage
-10 - +10 V DC
-1000 - +1000 mV DC
-10 - +10 V DC
DC current
-20 - +20 mA DC
Potentiometer
POT 0 - 4000 Ω
POT 0 - 2500 Ω
POT 0 - 1200 Ω
POT 0 - 600 Ω
POT 0 - 300 Ω
POT 0 - 150 Ω
Resistpr
OHM 0 - 4000 Ω
RTD
RTD Pt 100
RTD Pt 500
RTD Pt 1000
RTD Pt 50 Ω
RTD JPt 100
RTD Ni 508.4 Ω
RTD Cu 10
Thermocouple
TC (PR)
TC K
TC E
TC J
TC T
TC B
TC R
TC S
TC C
TC N
TC U
TC L
TC P
Wiring
2-wire
3-wire
-
Burnout
Upscale
Downscale
None
-
CJC
Enabled
Disabled
-
Temp. unit
degC
degF
K
-
Zero fine adj.
-320.00 - +320.00 (%)
0.00 (%)
Gain fine adj.
-3.2000 - +3.2000
1.0000
Zero base
depends on input types*
1
0.000
Full base
depends on input types*
1
0.000
Zero scaling
-32,000 - +32,000
0
Full scaling
-32,000 - +32,000
10,000
First order lag filter
0.0, 0.5 - 60.0 (sec.)
0.0 (sec.)
*1. For details, refer to the users manual of R80CFG
■
CHANNEL BATCH SETTING
ITEM
SETTING RANGE
DEFAULT VALUE
Version no.
–
–
Simulate input
Normal input
Simulated data
Normal input
