M-system R7L-DA16-R, Инструкция по эксплуатации, Страница: 6 / 19

R7L-DA16
EM-7804-F Rev.10 P. 6 / 19
• Configuration Properties
CONFIGURATION
PROPERTY NETWORK
VARIABLE
TYPE
{ Range }
{ Default }
EXPLANATIONS
SCPTdirection ----
{SNVT_state}
{0 or 1}
{0,0,0,0,0,0,0,0,
0,0,0,0,0,0,0,0}
Bit 0, Bit 1: Setting the extension module (Power supply must
be reset when this configuration property is changed.)
0,0 : Without extension module
1,0 : Discrete input (fb and other settings assigned to the 9th
and following points are invalid with 8-point input module.)
0,1 : Discrete output (fb and other settings assigned to the 9th
and following points are invalid with 8-point output module.)
Set this property before an extension module is connected.
Bit 2 through Bit 15 : Invalid
SCPTmaxSendTime
[Number of fb]
----
{SNVT_time_sec}
{0.0,10.0...3600.0}
{0.0}
Maximum time interval to send network variables (per fb).
(Power supply must be reset when this configuration property
is changed.)
Network variables are sent out in the specified intervals even
when there is no change in the value.
No sending when a value less than 10.0 is set.
Invalid property when the assigned fb has no network vari-
ables to be sent to the network.
SCPTminSendTime
[Number of fb]
----
{SNVT_time_sec}
{0.0,0.2...3600.0}
{1.0}
Minimum time interval to send network variables (per fb).
(Power supply must be reset when this configuration property
is changed.)
Network variables are sent out in the specified intervals even
when there are changes in the value faster than the interval.
No sending when a value less than 0.2 is set.
Invalid property when the assigned fb has no network vari-
ables to be sent to the network.
SCPTlocation ----
{SNVT_str_asc}
{30-character string}
{“”}
Used to write Tag No. (name)
SCPToemType ----
{SNVT_str_asc}
{e.g. “R7L-DA16_VER:0.10”}
Used to indicate Model No. and Version
SCPTserialNumber ----
{SNVT_str_asc}
{e.g. “ZZ123456”}
Used to indicate Serial No.
056 222 38 18 mailbox@sentronic.com www.sentronic.com
SENTRONIC
AG