R3-DA8C
P. 4 / 4
EM-8290
5-2-55, Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPAN
Phone: +81(6)6659-8201 Fax: +81(6)6659-8510 E-mail: [email protected]
DATA ASSIGNMENT
0
15
Di 1
Di 2
Di 3
Di 8
■
Di
0 : OFF
1 : ON
FUNCTIONS
■
Excitation Monitor ON
The input is held at the last status when the loss of excita-
tion is detected. The excitation must be connected across
the terminal 9 (19) and 10 (20).
■
Excitation Monitor OFF
All input signals are turned off when the loss of excitation
is detected.
WIRING INSTRUCTIONS
■
SCREW TERMINAL
Torque
: 0.5 N·m
■
SOLDERLESS TERMINAL mm (inch)
Refer to the drawing below for recommended ring tongue
terminal size. Spade tongue type is also applicable. Solder-
less terminals with insulation sleeve do not fit.
Applicable wire size: 0.3 – 0.5 mm
2
3.2 (.13) dia.
4 min.
(.16)
12 (.47) max.
6 max.
(.24)
3 (.12) max.
