MSP40 / MSP50
5-2-55, Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPAN
Phone: +81(6)6659-8201 Fax: +81(6)6659-8510 E-mail: [email protected]
EM-4883 P. 7 / 18
7. OUTPUT STEM STROKES
Refer to the figure and the table below for the stroke range of the output stem according to the model.
The upper-end position and the lower-end position can be set arbitrarily within the maximum stroke.
• Minimum and Maximum strokes according to model
MODEL
N
L
MIN. STROKE
MAX. STROKE
MSP40-1
19
29
5
10
MSP40-2
34
8
15
MSP50-1
30
40
5
10
MSP50-2
50
10
20
8. SEAL SPRING CONTRACTION AND THRUST
• Thrust and Seal Spring Contraction
MODEL
RATED
THRUST
(N)
THRUST WHEN
VALVE IS SEATED
(N)
THRUST WHEN
AUTO-SEUP IS
COMPLETE (N)
AJUSTABLE
MAX. CONTRACTION:
MAX. THRUST (N)
MAX. THRUST
WHEN OUTPUT
STEM IS LOCKED
MAX.
COTRACTION
(2 mm max.)
MSP40-x3
150
95
120
0.4 mm : 170N
340N min.
0.4 mm.
MSP40-x4
300
150
180
0.8 mm : 310N
800N min.
0.8 mm.
MSP40-x7
700
190
340
1.65 mm : 710N
1200N min.
1.65 mm.
MSP50-x3
150
100
120
0.4 mm : 170N
300N min.
0.4 mm.
MSP50-x4
300
160
190
0.8 mm : 310N
720N min.
0.8 mm.
MSP50-x7
700
190
270
1.65 mm : 720N
1200N min.
1.65 mm.
Scale graduated in increments of 1mm
for indicating spring contraction amount
Output stem
Max. stroke
L
N
Upper-end position
(Ex-factory position)
Min. lower-end position Max. lower-end position
Min. stroke
