M-system MI-75, Руководство пользователя

Страница: 18 / 56

18
•
Sugar , synthetic materials or aluminium sheets must not contact with the heating
zones. These may cause breaks or other alterations of the vitroceramic glass by
cooling : switch on the appliance and take them immediately out of the hot heating
zone (be careful : do not burn yourself).
•
Never place any hot container over the control panel.
•
If a drawer is situated under the embedded appliance, make sure the space between
the content of the drawer and the inferior part of the appliance is large enough (2cm).
This is essential to guaranty a correct ventilation.
•
Never put any inflammable object (ex. sprays) into the drawer situated under the
vitroceramic hob. The eventuals cutlery drawers must be resistant to heat.
Precautions in case of appliance failure
•
If a defect is noticed, switch on the appliance and turn off the electrical supplying.
•
If the ceramic glass is cracked or fissured, you must unplug the appliance and contact
the after sales service.
•
Reparing have to be done by specialists. Do not open the appliance by yourself.
Other protections
•
Note sure that the container pan is always centred on the cooking zone. The bottom of
the pan must has to cover as much as possible the cooking zone.
•
For the users of pacemaker, the magnetic field could influence its operating. We
recommend to get information to the retailer or of the doctor.
•
Do not to use aluminium or synthetic material containers: they could melt on still hot
cooking zones.
•
The worn appliances contain certain noble metals. Apply to the local government
about the possibilities of recycling.
DESCRIPTION OF THE APPLIANCE
Technical data
Type Total
Power
Heating zone
location
Nominal
Power *
Booster
Power*
Diametre
4 zones 7400W Front left
Rear left
Rear right
Front right 1850 W
1850 W
1400 W
2300 W 2500 W
2500 W
1800 W
3300 W 180 mm
180 mm
145 mm
210 mm
* The given power may change according to the dimensions and material of the pan