MDP-PM
P. 2 / 3
EM-8115 Rev.7
5-2-55, Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPAN
Phone: +81(6)6659-8201 Fax: +81(6)6659-8510 E-mail: [email protected]
INSTALLATION
In order to separate the head element from the base, loosen the screw located at the left-center of the element.
■
WALL MOUNTING
Refer to the drawings below.
■
EXTERNAL DIMENSIONS unit: mm (inch)
B
C
2
3
A
1
31.5 (1.24)
2–5 (.20) dia.
MTG HOLE
6–M4 SCREW
GROUND TERMINAL (G)
(used as mounting bracket)
27 (1.06)
53 (2.08)
80 (3.15)
45 (1.77)
HEAD ELEMENT
BASE
80 (3.15)
90 (3.54)
100 (3.94)
■
MOUNTING REQUIREMENTS unit: mm (inch)
Ground Terminal (G)
(used as mounting bracket)
Base
Element is secured to Base
with screw when M-RESTER is
shipped from Factory.
M•RESTER
MADE IN JAPAN N1430B
Lot.NO
MODEL
Head Element
Specifications
COMPONENT IDENTIFICATION
33 (1.30) MIN.
2–M4 SCREW
90 (3.54)
