M6DXAT
P. / 4
EM-7854 Rev.
INSTALLATION
Set the unit so that its DIN rail adapter is at the bottom.
When the unit is installed to an Installation Base (model
M6DBS), refer to its instruction manual.
■
MOUNTING THE UNIT ON A DIN RAIL
A) Hang the upper hook at the rear side of unit on the DIN
rail.
B) Push in the lower in keeping pressing the unit to the
DIN rail.
■
REMOVING THE UNIT
A) Pull down the DIN rail adaptor using a minus screw-
driver.
B) Pull out the lower part of the unit.
C) Remove the upper part from the DIN rail.
DIN Rail
A
B
DIN Rail Adaptor
A
B
C
COMPONENT IDENTIFICATION
Body
Front Cover
DIN Rail Adaptor
Spec. Marking
Status Indicator LED
Configurator Jack
Power LED
Alarm Monitor LED
■
FRONT VIEW (with the cover open)
Rugghölzli 2
CH - 5453 Busslingen
Tel. +41 (0)56 222 38 18
Fax +41 (0)56 222 10 12
www.sentronic.com
Produkte, Support und Service
SENTRONIC
AG
