AD2LC
P. 4 / 5
EM-1388 Rev.2
6. Set to ITEM P.
If necessary, go to Display Range Scaling, Moving Average,
and other adjustments.
Set the unit to Monitor Mode with ITEM P displayed other
than for programming.
■
TARE ADJUSTMENT
1. Turn the unit into Program Mode.
2. Contact Input Function
Choose ITEM 14 – DATA 0.
3. Turn the unit into Monitor Mode.
(ITEM 14 is set to DATA 0 as default. No need of
conducting 1 through 3.)
4. Set to ITEM P.
5. Close across the contact input terminals (Di).
By the abovementioned procedure, the tare value is stored in
ITEM 09, the PV display shows the value set by 0% Scaling
Value, and the transmitter outputs the value set by 0%
Output.
The abovementioned procedure is applicable to modifications
from default setting.
■
DIMENSIONS mm (inch)
■
CONNECTION DIAGRAM
TERMINAL CONNECTIONS
Connect the unit as in the diagram below or refer to the connection diagram label on top of the unit.
80 (3.15)
50 (1.97)
103 (4.06)
132 (5.20)
20
(.79)
•When mounting, no extra space is needed between units.
5
6
7
8
2
1
11
10
[3.3 (.13)]
80 (3.15)
35.4 (1.39)
40 (1.57)
50 (1.97)
7.8 (.31)
CLAMP
(top & bottom)
DIN RAIL
35mm wide
2–4.5 (.18) dia.
MTG HOLE
25 (.98) deep
11–M3.5
SCREW
3
9
4
16
(.63)
55 (2.17) min.
CONTACT
INPUT (Di)
4
5
10
3
9
11
6
U(+)
V(–)
POWER
7
8
OUTPUT
CONNECTOR
STRAIN
GAUGE
+
–
+
–
+
–
INPUT
EXC.
