47LCT
5-2-55, Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPAN
Phone: +81(6)6659-8201 Fax: +81(6)6659-8510 E-mail: [email protected]
EM-9507-A Rev.4 P. 2 / 5
COMPONENT IDENTIFICATION
Specifications
Strap
Watertight Packing
n TOP VIEW
n FRONT VIEW
n SIDE VIEW
Mounting Bracket
Terminal Cover
(4) Max/Min Button
(5) Alarm/ Button
(6) Scale/ Button
(7) Shift Button
(8) Up Button
(1) Main Display
(2) Alarm Indicators
(3) Function Indicators
Alarm/
Scale/
Max/Min
Shift
Up
Zro
HH
H
P
L
LL
Spn D/P
Tch Fnc Min Max
•
COMPONENT IDENTIFICATION
No. COMPONENT
FUNCTION
(1) Main display
Indicates present values, setting values and status of the unit.
(2) Alarm indicators *
1
Indicate alarm status of the input signal.
LL turns on when the LL alarm is tripped.
L turns on when the L alarm is tripped.
H turns on when the H alarm is tripped.
HH turns on when the HH alarm is tripped.
P turns on when none of the other alarms is tripped.
(3) Function indicators Indicate the status in each setting mode.
(4) Max/Min button
Used to switch the main display to show the present values, maximum values or minimum values etc.
(5) Alarm/ button
Used to confirm alarm setting value and to move on to the alarm and other setting modes; or to shift
through setting items in each setting mode.
(6) Scale/ button
Used to move on to the scaling and other setting modes; or to shift through setting items in each setting
mode.
(7) Shift button
Used to move on to the setting standby status of each setting mode and shift through display digits in
each setting mode.
(8) Up button
Used to execute / cancel Forced Zero or to select setting values in each setting mode.
*1. Only the ‘P’ indicator turns on with no-alarm-output type. ‘LL’ or ‘HH’ does not turn on with dual-alarm-output type.
All setpoints can be independently set either for Hi or Lo alarm trip.
