m-sur
e.co
.uk
www.m-sure.co.uk - Allendale Group Ltd, Pindar Road, Hoddesdon, Hertfordshire. EN11 0BZ.
Images & Content ©2020 Allendale Group Limited. E&OE - Specifi cations subject to change without prior notice.
M-SURE Digital Height Gaug
e User Man
ual
M-SURE Digital Height Gauge
•
Before using the Digital Height Gauge for the fi rst time, wipe with a clean cloth ideally soaked with cleaning oil.
•
This M-SURE Digital Height Gauge is a precision measuring instrument, please avoid using excessive force and treat with care.
•
The battery fi tted is intended for the factory test procedure and therefore may not meet the specifi ed battery life.
•
Avoid exposure to all liquids, excessive humidity or temperature.
•
Avoid exposure to bright sunlight.
•
Never apply voltage on any part of this Digital Height Gauge or electric engrave.
•
Remove the battery if the height gauge is not being used for a long period of time.
•
Never use solvents to clean the height gauge. Only use a soft cloth with cleaning oil.
•
The scriber tip is very sharp, take care when handling.
•
Protect the Height Gauge during storage with a thin coating of anti-corrosion oil.
Precautions
Part No: MS-510 Series
Doc V:
1.0
Digital Height Gauge
1. Carbide tipped scriber
2. Scriber clamp
3. Function buttons
4. LCD display
5. Fine adjustment screw
6. Fine adjustment locking screw
7. Main carriage locking screw
8. Data output
9. Beam
10. Battery
11.
Base
12. Base reference surface
2
1
10
11
3
9
12
4
5
8
7
6
1. Slide open the battery cover
and remove cover.
2. Remove the battery.
(A magnet tip tool can
be used)
3. Locate the side spring battery
contact.
4. Insert the replacement battery with
its edge against the side battery contact.
5. Press down on the opposite edge.
6. Locate the lugs on the battery cover
with the slots on the Height Gauge.
7. Insert the battery cover.
Battery Replacement
1
3
7
6
2
4
5
