Techmaster
M-LOCKS BV
Tel: +31 (0)314 376 876
Vlijtstraat 40
Fax: +31 (0)314 376 878
NL-7005 BN Doetinchem
3
www.m-locks.com
⇒
⇒
⇒
Press key to change user code
The display will show OLD CODE
Enter old code (when known), then enter new 6-digit code and
confirm once more. When everything is correct, following
message will show on display:
Press the key several times until EXIT will show on
display. Confirm with key Without pressing any key, the
display will automatically be turned off after 20 seconds.
MANAGEMENT USER
Press any key to activate the display.
On the display USER CODE will appear.
Press the key to enter the main menu.
On the display will appear:
Press key to enter the MANAGER MENU
Enter the 6-digit Manager code, then display will show:
Confirm with key to enter the menu. The display will show
an overview of active users.
Note:
V = Active user
_ = Free position
X = Blocked user (occupied position)
Enter the ID-number that you want to manage. The cursor will
move to the right position (visible by the blinking cursor)
e.g. ID-02
Confirm with key
In case you wish to install ID-number 02, confirm with key
In case you wish to block or delete the position, proceed with
key and confirm this action with key
OLD CODE
XX-XXXXXX
OPERATION DONE
USERS
MANAGEMENT
USER CODE
1 XX-XXXXXX
MASTER MENU
1= XXXXXXXX
MANAGER MENU
1= XXXXXXXX
02 03 04 05 06 07
V _ _ _ _ X
02 03 04 05 06 07
V _ _ _ _ X
02 _ t1
Install?