5
www.m-locks.com
Echo
V02
EN
Hold the base plate against the mounting surface so that the
‘T’ (upside down) is to be read at the bottom.
Fasten the plate hand-tight with the two supplied moun-
ting screws. We recommend thread-locking fluid
(eg Loctite) for securing the screws. Please grease those
parts where friction is expected lightly.
First insert the spring and then the plastic pin into the
corresponding hole of the input unit housing.
Insert the spindle into the square hole in the center of the
housing’s inner side. Insert the connecting cable carefully
and completely into the spindle groove.
Insert the battery compartment cover into the housing.
