LED
Status
Description
Solid
The adapter is on
Off
The adapter is off
Slow blinking The adapter is in power-saving mode
Fast blinking
The adapter is in pairing mode
Solid
The adapter is connected to a powerline network
Off
The adapter isn’t connected to any powerline network or is in
power-saving mode.
Blinking
The adapter is transferring data
Solid
The Ethernet port is connected, but there is no data being
transferred.
Off
The Ethernet port isn’t connected.
Blinking
The Ethernet port is transferring data.
Button
Description
RJ45 port
10/100 Mbps Ethernet port
Pair button
Pair button is used to secure a powerline network
Powerline Network Installation
1. Connect one end of the network cable to Ethernet port of your Computer.
2. Connect another end of the network cable to Ethernet port of Powerline adapter A.
3. Plug the Powerline Adapter A into a wall socket.
4. Connect one end of the second network cable to LAN port of Router or switch.
5. Connect another end of that network cable to Ethernet port of Powerline adapter B.
6. Plug the Powerline Adapter B into a wall socket.
Pair function
1. Press and hold the pair button on adapter A for about 3 seconds and the Power LED will
begin flashing.
2. Within 2 minutes, press and hold the pair button on adapter B for about 3 seconds and the
Power LED will begin flashing as well.
3. After a while, you’ll see the Powerline LED on both adapters light up. Powerline adapters will
restart automatically, indicating the two adapters have intercommunicated with each other
successfully.
Note
: If the Powerline adapter needs to quit the private network, please do as following: press
and hold pair button for more than 12 seconds. All LED lights should light off, and then all of them
light up again. Release the pair button, the Powerline adapter will restart automatically and quit
the private network.
Specifications are subject to change without notice.
„The Lechpol company declares that product ML0638 is consistent with the essential requirements
and other relevant provisions of directive 1999/5/EC. The proper declaration for download from
www.lechpol.eu”
English
Correct Disposal of This Product
(Waste Electrical & Electronic Equipment)
(Applicable in the European Union and other European countries with separate collection systems) This marking shown on
the product or Its literature, indicates that It should not be disposed with other household wastes at the end of its working
life. To prevent possible harm lo the environment or human health from uncontrolled waste disposal, please separate this
from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources. Household
users should contact either the retailer where they purchased this product, or their local government office, for details of
where and how they can take this item for environmentally safe recycling. Business users should contact their supplier and
check the terms and conditions of the purchase contract This product should not be mixed with other commercial wastes
for disposal.
Made in China for LECHPOL Zbigniew Leszek, Miętne, 1 Garwolińska Street, 08-400 Garwolin.
Power LED
Powerline LED
Ethernet LED
Pair button
RJ45 port
Power plug
Powerline Adapter
ML0638
User’s manual
EN
