Hydraulic Rotator (Accessory)
The hydraulic chute rotator uses a hydraulic motor, controlled by the tractor hydraulics to rotate
the chute. The kit includes a safety shield that also keeps the snow and ice form building up on
top of the gears.
The motor kit is bolted to the base with 2, 1/2-20 UNF bolts. The shield is mounted with 4, 5/16
bolts as shown.
When installing the hydraulic elbows, turn them in
"not more than 4 rounds"
then tighten the
jamnut to secure the elbow in the direction that you want the hoses to go,
as shown.
The relief valve is factory preset to 900 PSI.
Route the hoses and tie them to the top "A" frame support, away from moving equipment.
Ensure that the hoses do not get too tight or rub on the frame when the blower is raised or
lowered.
Motor
Elbow
Shield Bolts
Shield Bolts
Shield
Top "A" Frame Support
8
Содержание 87D
Страница 18: ...PTO Installation Instructions for Snowblower 17 ...
Страница 22: ...Effective PTO Drive Shaft Maintenance 21 ...