M.F. BLOUIN
Merchandising Solution
710 Main St. Rollinsford, NH 03869 • 1-800-394-1632 • www.mfblouin.com • [email protected]
Page-3
2-Sided Black Floor Poster Stand
ASSEMBLY INSTRUCTIONS
Product No. FFFP01568
Step 2:
After removing the poster holder &
spacer panel from its packaging, peel
off the protective film and insert the
spacer panel between the two sides
of the sign holder keeping the curved
corners to the bottom and roughly
aligning the holes.
* This is a convenient time to insert
your poster(s) and is recommended
but not necessary.
Step 3:
Insert the assembled poster holder
& spacer panel into the top slot of
the legs roughly aligning the holes.
Step 4:
Insert the threaded rods through holes
and tighten the lock knobs on each side
of the rods.
The display is now assembled!
Clean unit with acrylic cleaner (or mild detergent & water) and soft cloth only.
DO NOT USE ALCOHOL!
For a small container of NOVUS Acrylic Cleaner call today!
