M.F. BLOUIN
Merchandising Solution
710 Main St. Rollinsford, NH 03869 • 1-800-394-1632 • www.mfblouin.com • [email protected]
Page2
1-Sided Convex Wood Floor Frame with 4 Brochure Pockets
Product No. FFFM06093
ASSEMBLY INSTRUCTIONS
Base
Washer
FIG 1
FIG 2
Step
1
Mounting Brochure Holder
to Base
1. Stand the base upright.
2. Align the holes in the bottom of the brochure holder
with the holes in the base pedestal.
3. Insert the included hex bolts / washers into the pre-
drilled holes & tighten with the hex wrench. (Fig 1)
4. Tighten until snug -
DO NOT OVER TIGHTEN
.
Step
2
Mounting Convex Frame to
Brochure Holder/Base
1. Remove the acrylic faceplate from the frame.
2. Align the holes in the bottom of the convex frame
with the holes in the top of the brochure holder.
3. Insert the included hex bolts into the pre-drilled holes
& tighten with the hex wrench. (Fig 2)
4. Tighten until snug -
DO NOT OVER TIGHTEN
.
5. Re-insert the acrylic faceplate into the top of the
frame. This would be a good time to insert your
poster or sign.
Hex Bolt
Hex Wrench
Brochure Holder with
Acrylic Pockets
Convex Frame
