M-E FS-2 V2, Руководство по эксплуатации

Страница: 10 / 28

FS-2
V2
| ENGLISH
10
17. Battery compartment
18. Key “RESET”
19. Key “TONE“
20. Slide control for ringtone volume
TO SWITCH ON
Push switch (3) to “ON” to switch on the device.
TO CHANGE THE CHANNEL
Press the key “CH” (8) once. The channel display starts
flashing. Continue to the next upper or lower channel
by pressing the “+” (11) or “-“ (5) keys. You have 99
channels to choose from (1-99). When the desired channel is
displayed, press the “CH” (8) key once more or wait approx.
4 seconds until the channel display stops flashing.
NOTE : All communication devices wishing to talk to each
other must be set to the same channel.
VOLUME
Press the “VOL” (6) key once, the LCD symbols flash.
Increase or decrease the volume using the keys “+” (11)
and “-“ (5). When the desired volume is set, briefly press the
“VOL” (6) key or wait for approx. 4 seconds until the LCD
symbols stop flashing.
RING
You can trigger a ringtone on the other device by
pressing the “ “ (7) key.
Thank you for purchasing the m-e radio communication
system Model
FS-2
V2.
With this radio communication system you can communicate
over distances of up to 2000 meters without a problem. The
versatile individual components can be used as table or wall
units at home, in the office or at the neighbour (e.g. for
patient monitoring) or mobile in leisure time or in agriculture
using the separately available lithium-ion battery pack Mod.
‘FS-2 Akku’. Due to the handsfree function (VOX) you can
also use this device as a babyphone.
The intercom system can be extended with additional FS-2
V2
devices. It is not compatible with the predecessor models
FS-2 and FS-2.1.
LEGEND
1. Connector for power adaptor
2. Connector for headphone or active speaker
3. ON/OFF switch
4. Antenna
5. Key “-“
6. Key “VOL”
7. Key “ ”
8. Key “CH”
9. Key “ ”
10. Key “VOX”
11. Key “+”
12. LC display
13. Speaker
14. Control LED “VOX”
15. Control LED “Send/Receive”
16. POWER LED
FS-2 V2 150x180 Fin2.indd 10 29.10.20 14:28