KURZ-ANLEITUNG
SHORT INSTRUCTION MANUAL
FG-12
V3
Quick guide FG-12 Set
1. Insert 2 Batteries Type AA correct
into the battery compartment of the
receiver. Two beeps indicates pairing
is active.
2. Turn the sensitivity potentiometer
(2) on the transmitter to the lowest
position (counterclockwise), taking
care not to overtighten the
potentiometer.
3. Insert the batteries into the
transmitter with the correct polarity.
4. Tap the transmitter housing with
your finger to activate it. The LED
(4) lights up green and the receiver
plays a melody.
5. Select a ring tone by pressing the
sound selection button (3).
6. Now slowly increase the sensitivity
of the transmitter by turning the
potentiometer (2) clockwise in small
increments.
7. Test in mounted condition whether
the sensitivity is sufficient.
For further information, please refer to
the enclosed instructions.
