M Design ZINO 700, Инструкция по установке и эксплуатации

Страница: 9 / 13

5.1 Method of removal and installation of the deflector plates and pass
The dismantling of the deflector plate 1:
-Lift plate up / approx 3cm / and remove the stainless steel beam to each slide and push to one
side and a diagonal slide it out of the fireplace.
-Pull the plate to pull himself / approx 4 cm / etc diagonal sway and slide it out of the fireplace.
The dismantling of the pass refractory plate 2:
-Push the plate upwards until it stops at the flue outlet / slide of the plate holders No.1 and No.2
see Pic.12 / clone one side and downward on a diagonal and sliding the plate in the chamber and
then out.
The installation of the pass refractory plate 2:
-Slide-plate on a diagonal into the combustion chamber and to push all the way to the top flue out-
let and insert holders for No.1 and No.2 ( see Pic.12 )
The installation of the deflector plate 1:
-Slide plate on a diagonal to the fireplace stoves and push up and place it on the side facing the
combustion chamber, slide all the way back of the fireplace furnace.
-Stainless steel beam under a diagonal slide into fireplace oven and place it on lateral lines and
then insert the front edge of the plate / make sure that the side holders are well fitted ( see Pic.12
position 1 )
9