1
2
2
2
1
Keep pressing the button
until 24:00 appears in the top left corner (1).
Press several times on
until you see “bnd” on the screen (2)
Press shortly on and
You see the temperature on the
screen. Your remote control is now
connected.
2. Ignite the fire
1. First use (Connect the remote control)
Press simultaneously on and
You hear the ionisationpen ticking.
The ticking lasts for about 15 sec.
At initial setup, it’s possible that the pilot flame doesn’t
ignite imidiatly because the pipes are not yet fully deflated.
You can try this up to 5 times before the unit will be placed
in safety. If this fails, pleas contact your installer.
12. Remote control
3. Manual control
From the moment the burner 1 is on, you can start with the flame height
control.
The screen will automatically show manual control ( flame heigt control )
Press on until you see number 15.
This is the maximum flame height.
Choose a flame height from 1 to 15
by pressing or
2. Second burners
1. Main burner
22
Instructions for installation and use - Venus True Vision Gas
English
