background image

6

User manual - True Vision Rustica

English

2.4. SAFETY, DEVICE AND MAINTENANCE

Have your appliance inspected every 2 years by a qualified technician.

Please observe the following points:

• 

Never use the frireplace with open window

• 

Closed appliances produce intense heat, which means that all the surfaces of the external walls (metal, 
door frames and windows) become very hot once a certain tempera-ture is reached. Make sure that 
young children do not touch the window; this could result in severe burns.

• 

The logs, ceramic pebbles, a Diamond set and a Sapphire set are delivered with the appliance. Never 
put other objects in the flames!

• 

Check that there is nothing on the ignition pin and that the imitation coal does not lie on the small 
openings of the burner. When starting up, make sure you see the ignition sparks.

• 

If after 2 attempts the device does not start up, wait 15 minutes before restarting, or open the window 
to attempt to start up. If this does not work, please contact the dealer and not try to get the device 
started.

• 

Keep inflammable materials a suitable distance from the appliance (min. 1m)!

• 

Never modify the settings yourself! The furnace warranty will then be considered as invalid, null and 
void.

• 

Make sure that young children do not touch the glass, which could cause severe burns. Special atten

-

tion for the installation in a manger, place with young children, place with elderly people or place with 
disabled people and ensure that these people can not touch the window.

• 

Never let children use the remote control without supervision.

• 

If the burner goes out for any reason, wait at least three minutes before lighting the appliance again. 
Open the window to vent the fireplace.

• 

Walls and ceilings may be discolored by contaminated air in the room where the fireplace is located. 
This dirty air is drawn through the fireplace’s convection box and expelled through the convection grid 
and creates dark areas on the ceiling or walls. The use of candles and oil lamps is therefore not rec

-

ommended or limits their use. Cigarette and cigar smoke can also reinforce the phenomenon. It is also 
always advisable to ventilate the room where the fireplace is located.

WARNING: 

A house is never 100% free of dust. Heat sources and Heat circulations give a mix of air and thus a brew 

of house dust. This dust accumulates as and when in the wall around the fireplace and the convection 

grids. It is therefore essential to go from time to time the vacuum cleaner in the grids and especially 

before a first use after the summer. This phenomenon is comparable to the greyish stains seen above a 

conventional wall heater. You can order from your dealer metal covers to be placed on the grills during 

periods of non-use of the fireplace.

Содержание TRUE VISION RUSTICA














Отзывы: