M Design INTERRA 60, Руководство по установке, Страница: 7 / 18

INSTRUCTION FOR INSTALLATION AND USE 60-68-74
7
4.3 Fan (optional)

The fan (optional) starts automatically when a temperature of 50̊ is reached, and
switches off again automatically when 30̊C is reached.

The fan (optional) stops automatically working when you open the door.
This is fully automatically working fan. There is no used a Dimmer or Speed Controller for
the fan.
5
FIRST USE
The walls and cladding on newly surrounds the fireplace contain large amounts of
moisture, which have to be first evaporated before putting the fireplace into operation. If not,
plastering and cladding flaw or can be separated. Ask your installer how much time is
required for drying. For the first time do just a small fire. (What means level 1-5 on the
remote control).
At the first ignition may occur unpleasant smell. The smell comes from the protective
paint. These odors are harmless. To eliminate it is sufficient to ensure adequate ventilation
rooms.
On the glass may be formed light coating after first firing. This is the colour. The glass
can be cleaned using a cleaning product Bio-Clean M-Design after cooling the appliance. The
product may later be used to clean the glass door.
The fireplace must not be used if the door is without glass or if the door is open. If the
glass door is cracked or broken, it must not be used until the glass is replaced. In this case,
please contact your M-design seller.