15
Installation.
1. Open the package and take out the products , make sure all components are
included, IM, remote control, etc.
2.Install the fan according to below instructions.
a-.Put the column tube through the hole of base and fix them tightly by
pipe screw (Figure 1).
b-.Put the fan body on to the column tube, and fix by the adjustment
screw (Figure2).
c-. Amount the rear grill to the front cover of motor, and align the 3
positioning point to the holes on grill, finally fix by grill nut.(Figure 3)
d-. Fit the fan blade on the motor axel, tightly fixing by blade screw in
crosswise (Figure4).
e-. Assemble front grill and grill ring to the rear grid. Fix the grill with the
crew on grill buckle. (Figure5)
f-.Put the fan stand up after assembled and plug in, use according to the
instruction manual.(Figure6)
IV. INSTALLATION AND OPERATING INSTRUCTION
Fig.1
Fig.2
Fig.4
Fig.5
Fig.3
Fig.6
