6
Appendix A - Technical Specifications
Type:
2-way near-field studio reference monitors
LF Driver:
5-inch Kevlar curved cone with high temperature voice coil and damped
rubber surround. Magnetically shielded.
HF Driver:
1-inch magnetically shielded natural silk dome
Frequency
Response:
56Hz - 22kHz
Crossover
Frequency:
3kHz
LF Amplifier Power:
40W
HF Amplifier
Power:
30W
S/N Ratio:
> 100dB typical A-weighted
Input Connectors:
1 x XLR balanced input connector
1 x TRS balanced/unbalanced input connector
Polarity:
positive signal at + input produce outward LF cone displacement
Input Impedance:
20k ohms balanced,10k ohms unbalanced
Input Sensitivity:
85mV pink noise input produces 90dBA output SPL at one meter with
volume control at maximum
Protection:
RF interference, output current limiting, over temperature, turn-on/off
transient, subsonic filter, external mains fuse.
Indicator:
power on/off indicator on rear panel
Power
Requirements:
factory programmed for either 115V ~50/60Hz, 230V~50/60Hz or
100V~50/60Hz
Cabinet:
vinyl-laminated high acoustic efficiency MDF
Dimension:
250 mm (H) x 176 mm (W) x 200 mm (D)
Weight:
5.0 kg/unit (without packing)
* Above specifications subject to change without notice
WARNING:
This product contains chemicals, including lead, known to the State of California to
cause cancer, and birth defects or other reproductive harm.
Wash hands after handling.
Studiophile
BX5a Deluxe
Tested to comply with
FCC standards
FOR HOME OR STUDIO USE
© 2007 Avid Technology, Inc. All rights reserved. Product features, specifications, system
requirements and availability are subject to change without notice. Avid, M-Audio and Studiophile
BX5a Deluxe are either trademarks or registered trademarks of Avid Technology, Inc. All other
trademarks contained herein are the property of their respective owners
