Preset 6: Wizoo Darbuka/Latigo
Wizoo’s Darbuka and Latigo are VST/AU/RTAS plug-ins that can only be used from within a host application. Make sure the MIDI input to the host is
set to be your Oxygen keyboard. Set one of the tracks in the host to output to Darbuka or Latigo. Please consult the host’s documentation to see
how this is done. To make the most of the Wizoo preset, the host should be set to transmit on all channels to Darbuka or Latigo.
Presets 7 and 8: Propellerhead Reason
Preset 7 will control the mixer in Reason. Preset 8 will control the Subtractor, Malstrom or the NN-19 in Reason. To set up your Oxygen keyboard
to control the desired Reason module:
<
Select the Edit menu (Windows) or Reason menu (Mac), followed by “Preferences...”
<
Select ‘Advanced MIDI’ from the drop-down menu at the top of the screen.
<
Select your Oxygen keyboard as the Bus A device. Close the Preferences dialog.
In the ‘MIDI IN device’ section at the top of the Reason rack, select the desired module in the Channel 1 box.
Attention: Reason 3 includes presets for control surfaces and keyboards and lists “Oxygen 8 (older model)” and “Oxygen 8 (newer model)” as two
of the available options. These presets are intended for the original Midiman Oxygen 8 and not for the M-Audio Oxygen 8 v2. The controller mapping
may differ from your expectation when using one of these presets with a new M-Audio Oxygen 8 v2.
Preset 10: Undefined MIDI controllers
This preset loads MIDI controller messages that are undefined in the GM specification. This means that there is a reduced risk of altering a useful
control by accident with this preset selected. Many applications do not have their parameters set up with default MIDI controllers. Most of these
applications allow you to set up the controllers yourself. You should consult the documentation for your application to see how this is done. For
applications that can learn MIDI controllers for their parameters, you should select this preset.
www.m-audio.com
