51
Press:
The pad will send the MIDI CC number with this value when you press it.
Available Values:
0-127
Release:
The pad will send the MIDI CC number with this value when you release it.
Available Values:
0-127
Encoder Turn
To edit the turn functionality of the Encoder when in DAW Edit Mode, press and hold the
SHIFT
button and move the
ENCODER
. You can scroll through the available parameter values
using the Encoder. Select what parameter you would like to edit by pressing the Encoder.
Channel:
The Encoder will send its messages over this channel. Select the global channel
(
Global
), or a specific channel (
Channel 1
–
16
).
Available Values:
Global, 1-16
Message:
•
Mode:
This will specify what message will be sent when the Encoder is turned.
o
CC Relative:
This is useful to send standard MIDI CC messages to your DAW.
o
CC Cycle:
This useful for controlling from 2 - 4 CC values, as seen on a button or VI
control with 2-4 parameters. Select from 2-4 values.
o
CC Inc/Dec:
This is useful for scrolling through several CC values.
o
Program Cycle:
This is useful for selecting between different presets in software or
external MIDI hardware. Select from 2-4 program messages.
o
Program INC/DEC:
This is useful to scroll through multiple program messages.
o
Mackie Up/Down:
This is useful to scroll up/down in a DAW that responds to
Mackie Control Mode.
o
Mackie Left/Right:
This is useful to scroll left/right in a DAW that responds to
Mackie Control Mode.
o
HUI Up/Down:
This is useful to scroll up/down in a DAW that responds to HUI
mode.
o
HUI Left/Right:
This is useful to scroll left/right in a DAW that responds to HUI
mode.
•
CC Relative Type:
The Encoder will send a value number in the range of values when
you turn it left or right.
o
Right 65, Left 63
o
Right 63, Left 65
o
Right 127, Left 01
o
Right 01, Left 127
•
CC Cycle Mode Type:
The Encoder will send from 2 to 4 values when turned.
•
CC Cycle Value:
Specifies what CC value will be sent.
•
CC:
Selects the MIDI CC value that will be sent when the Encoder is turned.
•
Program Cycle Mode Type:
The Encoder will send from 2 to 4 values when turned.
•
Program:
Specifies what Program will be sent.
Содержание OXYGEN PRO 25
Страница 1: ...User Guide English 2 102 Appendix English 103 109...
Страница 114: ...m audio com Manual Version 1 1...
