MicroTrack 24/96
<
User Guide
11
<
Playback EQ Menu
This menu provides access to the six EQ curves built into the MicroTrack 24/96. These curves affect playback only—all recordings are
made without EQ. To activate an EQ preset, use the [NAV] wheel to select the curve, then press in to activate it. The EQ has the following
settings:
1.
Normal:
. . . . . . . . . .This defeats the EQ and provides flat playback response.
2.
Bass Boost
: . . . . . . . .Increases the low frequencies during playback.
3.
Bass Reducer
: . . . . . .Decreases the low frequencies during playback.
4.
Treble Boost
: . . . . . . .Increases the high frequencies during playback.
5.
Treble Reducer
: . . . . . .Decreases the high frequencies during playback.
6.
Treble and Bass Boost
: . Increases both the low and high frequencies during playback.
<
Scrub Audio Menu
This is an on/off setting that allows you to hear audio as you rewind and fast-forward through an audio file. When set to on, you will be
able to hear bits of the file as you seek. When off, the MicroTrack 24/96 will be silent while seeking.
<
Verify Delete Menu
This is a simple on/off menu preference that enables or disables the delete confirmation message. When this feature is on, you will be
asked to confirm a file delete any time you press the [DEL] key. This helps prevent accidental erasure of files you wish to keep. When this
feature is off, files will be deleted as soon as the [DEL] button is pressed.
<
Auto Off Menu
This menu sets the automatic shutoff time for the MicroTrack 24/96. Options range from “Never” to “60 minutes.” With “Never” selected,
the MicroTrack 24/96 will only turn off if you press the Power button. Any other value will cause the MicroTrack 24/96 to turn off after the
specified time of non-use. Please note: The MicroTrack 24/96 will ignore this setting while in Record, Paused Record, or Playback modes
to ensure that recording and playback aren’t suddenly interrupted during use.
<
Language Menu
This menu allows you to select the language to be used on the MicroTrack 24/96 display. At the time of this writing, the options are
English and Spanish.
<
Factory Defaults Menu
Entering this menu option will allow you to reset all of the MicroTrack 24/96’s internal settings to the original factory defaults. When you
enter this menu, you will be presented with a confirmation message stating “Return all setting to factory defaults? Press the NAV wheel
to confirm.” Press in on the [NAV] wheel to restore the defaults. If you want to cancel this operation, press [MENU] to exit.
<
Firmware Update Menu
From time to time, M-Audio may release updates to the operating system for the MicroTrack 24/96. These updates must be loaded
into the MicroTrack 24/96 firmware before you can use them. The Update Firmware menu is used to initiate this process. Directions for
updating the firmware will be included with the update files you download from the M-Audio website ( HYPERLINK “http://www.m-audio.
com” www.m-audio.com).
<
Version Menu
Entering this menu will show the current operating system version. There are no adjustable settings in this menu option.
<
Contrast Menu
This setting adjusts the contrast of the MicroTrack 24/96 display. Simply press up or down on the [NAV] wheel to adjust this value. Higher
values will result in a darker display. Press in on the [NAV] wheel when finished.
<
Setup Time & Date
These settings are used to adjust the time and date on the device. Use the [NAV] wheel to make adjustments. Use the [MENU] key to
exit.
3 - Hardware Controls and Indicators
