3
To set M-Track Duo as your default playback device, follow the directions below based on
your computer’s operating system.
Windows:
1.
Use the included USB cable to connect the M-Track Duo to your computer.
2.
In the Taskbar, locate the
Volume Control
"speaker" icon. Right-click the speaker and
open
Sound
Settings > Sounds
.
Alternatively, go to
Start Menu > System > Sound > Sound Control Panel
.
3.
In the
Windows Sound
control panel select the
Playback
tab and select
USB Audio
Codec
as the default device.
4.
Click the
Recording
tab and select
USB Audio Codec
as the default device.
5.
Click
Properties
in the lower right-hand corner.
6.
In the new window, click the
Advanced
tab and select
2-channel
,
24-bit
,
48000 Hz
(Studio Quality)
as the default format.
7.
Uncheck both boxes under
Exclusive Mode
.
8.
Click
OK
to close the Properties window.
9.
Click
OK
to close the Sound control panel.
macOS:
1.
Use the included USB cable to connect the M-Track Duo to your computer.
2.
Go to
Applications > Utilities > Audio MIDI Setup
.
3.
In the
Audio Devices
window, select
USB Audio Codec
in the left column.
4.
Right-click
USB Audio Codec
, and select
Use this device for sound input
.
5.
Right-click
USB Audio Codec
, and select
Use this device for sound output
.
6.
Quit Audio MIDI Setup.
Connection Diagram
Items not listed under
are sold separately.
Note:
Use the
+48V (Phantom Power) Switch
only if a microphone requires phantom power.
Most dynamic microphones and ribbon microphones do not require phantom power, but most
condenser microphones do. Consult your microphone's documentation to find out whether it
needs phantom power.
Front Panel
Rear Panel
Monitors
Headphones
Guitar
Computer
Microphone
Содержание M-Track Hub
Страница 28: ...m audio com Manual Version 1 3...
