10
Keystation Rear Panel
If you look at the back of your Keystation keyboard you will see the fol-
lowing:
Sustain Jack:
This switch allows you to connect an optional standard
foot switch to your Keystation. when the foot switch is depressed notes
played on the Keystation will be sustained, i.e. they will continuously
sound as long as the foot switch is held down.
MIDI Out Jack:
This standard MIDI jack is used to send all MIDI mes-
sages out from the Keystation. A standard 5 pin MIDI cable would nor-
mally be used to connect this jack to the MIDI In jack of a computer or
other MIDI instrument.
Power On/Off Switch:
The Power Switch turns the Keystation's power
on and off. This switch must be turned on in order to use the
Keystation. Also, make sure the power supply is properly plugged into
the Keystation.
Basic Trouble-Shooting
If you are having problems with the Keystation you should first check
the following common scenarios:
1. Are all your cables working?
2. Are all your cables plugged in properly (i.e. the Keystation MIDI
Out connected to your computer or MIDI module MIDI In)?
3. Is the power adaptor plugged into your Keystation? Is the power
switch on the back of the Keystation turned on and is the
Keystation red power LED lit?
4. Is everything powered up?
POWER
ON/OFF
MIDI OUT
DC-9V
SUSTAIN
K
EYSTATION
™
Rear Panel
